StripMeister E500 Product Specifications
The StripMesiter E500 wire stripper can strip wire at a rate of 70 to 110 feet per minute. StripMeister recommends using the variable speed control to star...
Wed, 20 Sep, 2017 at 10:01 AM
The StripMeister E500 features a 1/3 HP DC motor with a variable speed controller.
Thu, 21 Sep, 2017 at 11:49 AM
The StripMeister E500 motor's frequency is 60Hz.
Thu, 21 Sep, 2017 at 11:50 AM
The StripMeister E500 rated input is 3A.
Thu, 21 Sep, 2017 at 11:51 AM
The StripMeister E500 can strip between 14 awg to 500 mcm (1/8”-1-3/16” Diameter)
Thu, 21 Sep, 2017 at 11:53 AM
The StripMeister E500 weighs 40 lbs.
Thu, 21 Sep, 2017 at 3:34 PM
The StripMeister E500 has 1 phase.
Thu, 21 Sep, 2017 at 3:36 PM
The StripMeister E500 shipping dimensions are 20' wide x 20" High x 16" deep.
Thu, 21 Sep, 2017 at 3:38 PM
The StripMeister E500 takes a T8A Ceramic Cylinder, Time-Lag, 250VAC/UL/CSA, 5x20mm Fuse. You can find the fuse by clicking this link.
Fri, 22 Sep, 2017 at 1:05 PM
You can register your StripMeister by clicking the corresponding link below. United States Registration Page Canada Registration Page
Fri, 16 Feb, 2018 at 1:53 PM